North Spore Myco-Mister II Ultrasonic Tower Humidifier

The Myco-Mister II Ultrasonic Tower Humidifier was designed for use with the BoomRoom II or with a Martha tent setup. Unlike traditional humidifiers, the Myco-Mister features 3 transducer plates to create an ultra-fine mist that improves mushroom quality and reduces blotch and other diseases. Its large 4.4 gallon capacity allows for days of humidity without needing to refill. And its automatic shut-off prevents motor damage when the reservoir is empty.

Features:
Flip top lid for easy refilling
16L water reservoir
Dial for adjusting humidity levels
Four wheels for easy moving
Built-in automatic shut off

Specs:
Power: AC power adapter / 80 watts
Voltage: 100-240V
Capacity: 16 L
Noise: <40 dB
Output: Up to 350 sq ft. / 2000 ml per hour
Recommended add-ons:
Auto Fill Float Valve Kit
Important notice:
⚠️ Using tap water with a high mineral content (aka "hard water") with any humidifier can cause a fine white dust build to up and/or to be emitted. To avoid this, use distilled or demineralized water. Or, add a demineralization cartridge to the water tank. (This can be done by removing the top cover and placing the cartridge inside.)

See user manual and cautions & considerations below.

Maintenance & storage
WARNING: Do not clean while the unit is switched on. Turn off the power and unplug the unit from its power source before any cleaning or maintenance.

WATER TANK
DO NOT leave water sitting stagnant in tank for more than a couple of days as it may cause bacterial growth. Always empty tank if not planning to use it for a few days.
STORAGE
When not in use, store in a cool dry location in original packaging or completely covered (to prevent dust buildup).
If water is left in the unit during storage, it may harden and leave deposits that may affect the unit from operating properly.
Leave the cap of the water tank loose during storage. This will prolong the life of the gasket.
CLEANING

DO NOT use detergents or chemicals to clean the tank or base as it can interfere with the mist.
If the water tank is dirty, soak it with a mild bleach and water solution (1 cup of bleach + 1 gallon of water) and rinse clean.
Wipe the exterior of the body with a damp cloth.
Clean and rinse the water tank and mist nozzle with lukewarm water frequently to avoid mineral buildup.
Keep the nebulizer and water sensor free of mineral deposits. 
Only clean the nebulizer and sensor with a soft brush (e.g. soft toothbrush).
DO NOT scrape the nebulizer or water sensor to avoid damage.
DO NOT clean with tools that have metal parts.
DO NOT spray water or any liquids onto the control knob.
NEVER immerse the base in water or let water enter other openings.