The Bowsmith NonStop Emitter design,
patented in 1974, is based on a simple unique principle found in no
other emitter. This Pressure Cascade Principle permits the emitter to
tolerate large amounts of suspended solids in irrigation water, without
clogging and without the need for fine-mesh filter screens.
For over 40 years, millions of Bowsmith NonStop emitters have demonstrated that the unique NonStop Continuous Self-Cleaning Action (Pressure Cascade Principle) really works, even under conditions that would quickly clog ordinary emitters. With only 30-mesh filtration (recommended minimum), Bowsmith NonStop emitters have operated successfully with water containing heavy concentrations of sand, silt, iron bacteria “slime”, calcium carbonates, even algae and moss.
This Results In:

• Trees and plants being properly irrigated.
• Reduction in plant loss and stress.
• Less maintenance and lower labor costs
• Lower capital investment in filtration equipment.
How It Works
1. The flow path is a series of orifices in the silicone diaphragm.
2. In normal operation, the total pressure difference between inlet an outlet is divided equally across each of the orifices in the flow path. For example: 20psi inlet pressure, and 10 orifices in the flow path, the pressure drop across each orifice is 2psi.
3. If an obstruction should occur in any of the orifices, the flow through that orifice will be momentarily restricted. As a result, the pressure drop across the orifice will increase, causing the orifice to enlarge until the obstruction passes.
For over 40 years, millions of Bowsmith NonStop emitters have demonstrated that the unique NonStop Continuous Self-Cleaning Action (Pressure Cascade Principle) really works, even under conditions that would quickly clog ordinary emitters. With only 30-mesh filtration (recommended minimum), Bowsmith NonStop emitters have operated successfully with water containing heavy concentrations of sand, silt, iron bacteria “slime”, calcium carbonates, even algae and moss.
This Results In:

• Trees and plants being properly irrigated.
• Reduction in plant loss and stress.
• Less maintenance and lower labor costs
• Lower capital investment in filtration equipment.
How It Works
1. The flow path is a series of orifices in the silicone diaphragm.
2. In normal operation, the total pressure difference between inlet an outlet is divided equally across each of the orifices in the flow path. For example: 20psi inlet pressure, and 10 orifices in the flow path, the pressure drop across each orifice is 2psi.
3. If an obstruction should occur in any of the orifices, the flow through that orifice will be momentarily restricted. As a result, the pressure drop across the orifice will increase, causing the orifice to enlarge until the obstruction passes.